Bulb Replacement; Instructions For Use; Starting Production - MBM FB77AXL Manual De Uso

3. Insert the new bulb into the support
SAFETY THERMOSTAT REPLA-
CEMENT
1. Unscrew the thermostat from the
support (
2. Remove the bulb from the support
3. Screw the new thermostat and in-
sert the new bulb into the support

BULB REPLACEMENT

LOCATION OF MAIN COMPONEN-
TS - see SECT. IMAGES - REF. r)
The layout of the figures is purely indi-
cative and can undergo variations.
1. Open burners adjustment knob.
2. Thermostat adjustment knob.
3. Piezoelectric button.
4. Pilot light control.
5. Cooking compartment (oven).
6. Hob (gas range - hotplates).
7. Container to gather drain material.
KNOBS, KEYS AND INDICATOR
LIGHT MODES AND FUNCTIONS
see SECT. IMAGES - REF. s). The
layout of the keys in the figures is pu-
rely indicative and can be subject to
variations.
BURNER REGULATION KNOB
1
(GAS). It performs three different
functions:
1. Igniting the pilot light and burner.
2. Adjusting the flame (minimum - ma-
ximum).
3. Turning the appliance off.
THERMOSTAT KNOB (GAS). It
2
performs three different functions:
1. Igniting the pilot light and burner.
2. Temperature regulation.
3. Turning the appliance off.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
REPLACING COMPONENTS
1. Disconnect the electrical con-
nections
2. Fit the new bulb
3. Reconnect the cables
Check the gas seal with the
appropriate instruments and
replace the parts removed in
the correct order.

INSTRUCTIONS FOR USE

THERMOSTAT KNOB (ELE). It
3
performs three different functions:
1. Temperature regulation / 2. Heating
phase Start/Stop / 3. Grill function
PIEZOELECTRIC BUTTON
4
(GAS). It performs one function:
1. When pressed, it produces the
spark to ignite pilot light.
GREEN
5
(GAS/ELECTRIC): The indicator
is subordinated to use of the switch-on
knob. Lighting of the indicator signals
the operating phase.
YELLOW
6
(GAS/ELECTRIC):
sent, the indicator is subordinated to
use of the thermostat knob. Lighting of
the indicator signals the heating phase.

STARTING PRODUCTION

Before proceeding see chapters
2 and 5.
The products must be placed in
the specific cooking containers
and positioned correctly on the
burners and/or in the cooking com-
partment of the oven.
Diameter Pots / Burner 5.5-7-11
kW Ø mm 200-375
- 18 -
INDICATOR LIGHT
INDICATOR LIGHT
When
9.
pre-