6. Unit surface temperature of the flanges is high, thus do not touch it and do not cover it except
handle, knobs.
7. Don't heat wet clothing etc. in the surface of the control chamber, as this may cause undue
move of the thermostat.
8.
Cleaning and maintenance.
•
The electric heater should be cleaned regularly to wipe out the dust in the surface of
flanges. As this may result the radiating efficient.
•
Disconnect electricity supply and allow radiator to cool, wipe out with a soft damp cloth.
Do not use detergent or abrasives.
•
Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces getting rusty,
because of the damage of paint coat.
MAIN TECHNOLOGY SPECIFICATIONS
Power supply: 220-240V~ 50Hz
- 12 -