Sony SU-WL500 Manual De Instalación página 11

2
Remove the screws from the
rear of the display.
FW-65BZ35F/FW-55BZ35F
FW-49BZ35F
Note
Be sure to store the removed screws in a safe place,
keeping them away from children. When attaching
the stands to the display again, be sure to install the
stored screws back in the original position.
3
Referring to the Screw and Hook
locations diagram/table on
page 21, determine the screw
positions, and secure the
Mounting Hook to the rear of the
display.
 Secure the Mounting Hook to the rear of the
display temporarily, using the four screws
(+PSW6 × 16).
 Be sure that both screws are securely
tightened with equal torque strength to the
rear of the display.
FW-65BZ35F/FW-55BZ35F
Mounting Hook
FW-49BZ35F
Mounting Hook
Screw
(+PSW6 × 16)
Screw
(+PSW6 × 16)
11
(GB)