Sony SU-WL500 Manual De Instalación página 16

4
Make sure that the screw 
firmly secures the arm base of
the Mounting Hook (both left
and right).
FW-85BZ35F/FW-75BZ35F/FW-65BZ35F/
FW-55BZ35F
FW-49BZ35F/FW-43BZ35F
Notes
• When installing in portrait orientation, be sure to
keep the Mounting Hook angle to 0 degrees. Do
not use another angles.
• Make sure that the two arm bases are screwed in
securely.
16
(GB)
Step 5:
Installing the display
on the wall
WARNING
Be sure to complete the installation before
connecting the AC power cord to the wall outlet. If
you allow the AC power cord to be pinched under
or between pieces of equipment, this may result
in a short circuit or an electric shock.
Be careful not to stumble over the AC power cord
or the display, as you may hurt yourself.
1
Connect the AC power cord and
the connecting cable(s) supplied
with the display to the display.
Connect the AC power cord and the connecting
cable(s) to the connectors on the rear of the
display. For details on connecting the AC power
cord and the connecting cable(s), refer to the
instruction manual of the display.
Notes
• You cannot connect the cables to the display after
installing it on the Base Bracket.
• Subcontract the cable routing in the wall to a
licensed contractor.