T'nB CBSPBK Manual Del Usuario página 10

use CBSPBK_toflashat100% 04/07/13 18:30 Page10 use CBSPBK_toflashat100% 04/07/13 18:30 Page10
EN EN
Notice-CBSPBK.indd 10
7
5 5
5
9 9
9
3
10
DESCRIPTION
D D
ESCRIPTION ESCRIPTION
1- Multifunction button (on/off,
on/off hook, pairing.)
1 - multifunction button (on/off, on/off hook, play/pause, pairing etc.) 1 - multifunction button (on/off, on/off hook, play/pause, pairing etc.)
2 - Full headset
2 - Full headset 2 - Full headset
3 - Volume -
3 - Volume - 3 - Volume -
4 - Next track 4 - Next track 4 - Next track
5 - Volume + 5 - Volume +
5 - Volume +
U U
SE SE
USE
1. To charge the headset: 1. To charge the headset:
1. To charge the headset:
Warning: charge your T'nB headset before use. Warning: charge your T'nB headset before use.
Warning: charge your T'nB headset before use.
you can recharge your headset: you can recharge your headset:
you can recharge your headset:
- Either via your computer's uSB port using the uSB cable supplied. - Either via your computer's uSB port using the uSB cable supplied.
- Either via your computer's USB port using the USB cable supplied.
- Or via an optional uSB charger (this accessory is available on our web- - Or via an optional uSB charger (this accessory is available on our web-
- Or via an optional USB charger (this accessory is available on our
site www.t-nb.com). site www.t-nb.com).
website www.t-nb.com).
During charging, the red LED remains lit and then switches off once the During charging, the red LED remains lit and then switches off once the
During charging, the red LED remains lit and then switches off once
battery is recharged. battery is recharged.
the battery is recharged.
Charging time: 2-3 hours. Charging time: 2-3 hours.
Charging time: 2-3 hours.
NB: When the battery is low, the red LED flashes. NB: When the battery is low, the red LED flashes.
NB: When the battery is low, the red LED flashes.
2. To switch the headset ON/OFF:
2. To switch the headset ON/OFF: 2. To switch the headset ON/OFF:
To switch the headset ON:
To switch the headset ON: To switch the headset ON:
Press the multifunction button (1) for 3 seconds. The blue LED flashes
Press the multifunction button (1) for 3 seconds. The blue LED flashes Press the multifunction button (1) for 3 seconds. The blue LED flashes
every 5 seconds. every 5 seconds. every 5 seconds.
To switch the headset OFF, press the multifunction button (1) for 3 se- To switch the headset OFF, press the multifunction button (1) for 3 se-
To switch the headset OFF, press the multifunction button (1) for 3
conds. conds.
seconds.
3. To pair the T'nB device with your Bluetooth® device (phone, tablet,
3. To pair the T'nB device with your Bluetooth® device (phone, tablet, 3. To pair the T'nB device with your Bluetooth® device (phone, tablet,
mP3 ...):
mP3 ...): mP3 ...):
1) Switch the T'nB device ON.
1) Switch the T'nB device ON. 1) Switch the T'nB device ON.
2) Press the multifunction button (1) for approximately 5 seconds. The
2) Press the multifunction button (1) for approximately 7 seconds. The 2) Press the multifunction button (1) for approximately 7 seconds. The
LED flashes alternately blue and red. The T'nB device is in pairing
LED flashes alternately blue and red. The T'nB device is in pairing LED flashes alternately blue and red. The T'nB device is in pairing
mode.
mode. mode.
3) Enable the Bluetooth® function on your smartphone/tablet/mP3
3) Enable the Bluetooth® function on your smartphone/tablet/mP3 3) Enable the Bluetooth® function on your smartphone/tablet/mP3
player, etc and start the device search (see your Bluetooth® device's
player, etc and start the device search (see your Bluetooth® device's player, etc and start the device search (see your Bluetooth® device's
instructions).
instructions). instructions).
4) Select the TNB device from the list offered on your device.
4) Select the TNB device from the list offered on your device. 4) Select the TNB device from the list offered on your device.
5) Depending on the model, either the device connects automatically,
5) Depending on the model, either the device connects automatically, or 5) Depending on the model, either the device connects automatically, or
or you have to enter the password 0000. When pairing is successful,
you have to enter the password 0000. When pairing is successful, the you have to enter the password 0000. When pairing is successful, the
the blue LED flashes.
blue LED flashes. blue LED flashes.
Once paired, the T'nB device automatically recognizes your device as
Once paired, the T'nB device automatically recognizes your device as Once paired, the T'nB device automatically recognizes your device as
soon as you turn it on.
soon as you turn it on. soon as you turn it on.
6 6 1 1
1
7 7 3 3 4 4
6 - Operating LED
7 - Previous track
8 - Microphone
6 - Operating LED 6 - Operating LED
9 - Charging socket
7 - Previous track 7 - Previous track
8 - microphone 8 - microphone 10 - Play/Pause
9 - Charging socket 9 - Charging socket
- 10 - - 10 -
2 2
2
4
8
6
8 8
30/01/2015 18:37
F F
UNCTI UNCTI
• To adjust • To adjust
Press the Press the
• To play a • To play a
Press the Press the
• To skip to • To skip to
Press the Press the
If your hea If your hea
• To answe • To answe
Press the Press the
tening to tening to
the conve the conve
tomaticall tomaticall
• To make • To make
Dial the n Dial the n
via the he via the he
• To make • To make
with voice with voice
Press the Press the
the heads the heads
• To redial • To redial
Press the Press the
starts. starts.
• To reject • To reject
When a c When a c
• To switch • To switch
headset t headset t
During th During th
conds. Th conds. Th
• HEAD • HEAD
Impeda Impeda
Freque Freque
Sensiti Sensiti
max. in max. in
magne magne
Volume Volume
Track s Track s
• CONN • CONN
Bluetoo Bluetoo
Workin Workin
• BATT • BATT
Lithium Lithium
Autono Autono
Rechar Rechar