Initial Settings
Notes
• When no subwoofer is connected to the rear
output, select
Rear SP:FULL
• When a subwoofer is connected to the rear
output, set for subwoofer
• When the rear output setting is
you cannot change the subwoofer controller.
3 Change the subwoofer controller with
2/3.
Pressing 2/3 will switch between
and
:INT
S.W Control :EXT
be displayed.
Switching the handsfree
telephoning
You can switch the handsfree telephoning on/off
in accordance with the connection of the cellu-
lar telephone you use.
When using the handsfree telephone unit (sold
separately), select
Hands-Free:ON
1 Press
to select
FUNCTION
Press
repeatedly until
FUNCTION
appears in the display.
on or off with 5/∞.
2 Select
TEL1
Pressing 5/∞ will switch
on and off and that status will be displayed (e.g.,
).
Hands-Free:ON
.
.
Rear SP:S.W
,
Rear SP:S.W
S.W Control
and that status will
.
TEL1
Hands-Free
between
Hands-Free
Switching the Telephone
Muting/Attenuation
When a call is made or received using a cellular
telephone connected to this product, you can
select between muting and attenuation when
using the Handsfree Telephone Unit (when
is selected).
Hands-Free:OFF
1 Press
to select
FUNCTION
Press
repeatedly until
FUNCTION
appears in the display.
2 Switch the telephone muting/attenuation
with 2/3.
Pressing 2/3 will switch between
(attenuation) and
:ATT
ing) and that status will be displayed.
Switching the telephone standby
If you want to use the handsfree telephone unit
without playing other sources of this product,
activate the telephone standby mode.
1 Press
to select
FUNCTION
Press
repeatedly until
FUNCTION
appears in the display.
on or off with 5/∞.
2 Select
TEL2
Pressing 5/∞ will switch
on and off and that status will be displayed (e.g.,
).
TELstandby:ON
Note
• You can select the telephone standby mode
when
Hands-Free:ON
free telephoning mode.
.
TEL2
Telephone
Telephone
(mut-
Telephone :MUTE
.
TEL2
TELstandby
between
TELstandby
is selected in the hands-
En
Section
08
39