Storing And Recalling Dynamic Label; Additional Information; Cassette Tapes; Cleaning The Playback Head - Pioneer KEH-P7020R Manual De Operación

Section
Other Functions
09

Storing and recalling dynamic label

You can store data from up to six dynamic label
transmissions at buttons
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on page 43.
2 Press any of 1–6 and hold to store the
selected dynamic label.
The memory number will display and the
selected dynamic label has been stored in mem-
ory.
The next time you press the same
the dynamic label display the stored text is
recalled from memory.
44
En
.
1–6
button in
1–6

Additional Information

Cassette tapes

• A loose, torn or warped label on a cassette
tape can jam the cassette player. Do not use
cassette tapes with loose, torn or warped
labels.
• Cassette tapes longer than C-90 (90-minute
tapes) can cause the tape to jam in the cas-
sette player. Do not use tapes longer than
C-90.
• Cassette tapes exposed to high temperatures
may warp and jam the cassette player. Keep
cassettes out of direct sunlight or places
where there are high temperatures.
• Store unused tapes in a tape case where there
is no danger of them becoming loose, dirty or
dusty.

Cleaning the playback head

If the head becomes dirty, the sound quality will
get bad and there will be sound dropouts and
other problems. If you have any of these prob-
lems the head may need cleaning.