Operating The Alarm System; Arm The System (All Sensors); Partially Arm The System (In-Home Security); Disarm The System Using The Control Panel - Eminent EM8610 Manual Del Usuario

60 |
MULTILINGUAL

4.0 Operating the Alarm System

4.1 Arm the system (all sensors)

Press .

4.2 Partially arm the system (In-home security)

Press . All sensors in the "Normal-group" are enabled, sensors in the "Home-
group" are disabled.

4.3 Disarm the system using the control panel

Enter your 4 digit password (default: 1234) and press . You will hear a beep to
notify you the system is disarmed. When you hear 3 beeps the password is not
correctly entered.

4.4 Disarm using RFID-tag

Hold the RFID-tag close to the RFID-reader (circle left of the number pad). You will
hear a beep to notify you the system is disarmed. Notice: This feature will only
work when the device is powered by the power adapter and is disabled when
working on backup batteries.
Remark : RFID-tags can only be used to disarm the system not to arm the system.
Remark : When the device is not powered by the power supply you cannot disarm the
system using the RFID-tag.

4.5 Record and playback a personal message

Press to start recording a personal message of max. 10 seconds. When you are
ready press to stop recording. You can playback the message by pressing the
circle.
The personal message will be played on the mobile that is added as alarm number.
This is not a message played in case of intruders.