Rfid-Tag; Speed-Dial; Dial; Output For Electronic Lock - Eminent EM8610 Manual Del Usuario

61 |
MULTILINGUAL

4.6 RFID-tag

With the RFID tag you can disarm the system. You can also assign a name to the
RFID-tag so you will receive a text message with the name of the person that disarmed
the alarm.
Remark: To activate this function you need to store a text message number and
activate the RFID-tag text message function.
Nancy is home
Mother
Administrator
Remark : Users can only receive a notification if a mobile-number is stored and the
RFID-tags have a name stored.

4.7 Speed-dial

When you press in stand-by mode the system will call a preset emergency
number. Press to terminate the call.

4.8 Dial

From stand-by mode you can enter a phone number and call directly to that phone
number by pressing . The system will start dialing the phone number and you are
now able to communicate by the built-in microphone. Press to terminate the call.

4.9 Output for electronic lock

Once the alarm is disarmed, an electronic door-lock can be opened.