Cleaning The Battery; Maintenance; Deburring The Guide Bar; Sharpening The Saw Chain - Stihl HTA 66 Manual De Instrucciones

Ocultar thumbs Ver también para HTA 66:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 81

16 Maintenance

15.3 Cleaning the Battery

► Clean the battery with a damp cloth.
16 Maintenance

16.1 Deburring the Guide Bar

A burr can build up on the outer edge of the guide bar.
► Remove burr with a flat file or a STIHL guide bar dressing
tool.
► If you have any queries: Contact your STIHL servicing
dealer.

16.2 Sharpening the Saw Chain

Correctly sharpening saw chains requires a lot of practice.
STIHL files, STIHL filing aids, STIHL sharpeners and the
brochure "Sharpening STIHL Saw Chains" help you achieve
the right results. To obtain the brochure visit
http://www.stihl.com/sharpening-brochure.
STIHL recommends you have saw chains resharpened by a
STIHL servicing dealer.
WARNING
The chain's cutters are very sharp. There is a risk of cut
injuries.
► Wear work gloves made of durable material.
0458-191-9821-A
► File each cutter with a round file so that the following
points are observed:
– Round file matches the chain pitch.
– File from the inside to the outside of the cutter.
– Hold the file at right angle to the guide bar.
– Maintain a filing angle of 30°.
► File down the depth gauges with a flat file so that they are
level with the STIHL filing gauge and parallel to the service
mark. The STIHL filing gauge must match the chain pitch.
► If you have any queries: Contact your STIHL servicing
dealer for assistance.
English
67

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hta 86

Tabla de contenido