Q Troubleshooting - LIVARNO LUX HG00731A Instrucciones De Utilización Y De Seguridad

u sing the LED inspection light without
a power connection
F ully charge the LED inspection light
the LED work lamp".
P ress the ON / OFF switch
T o switch on the LED inspection light, pull it carefully out of the lamp body,
using the handle
T o switch off the LED inspection light, push the inspection light and the lamp
body back together again, using the handle (see Fig. A).
Corded use of the LED inspection light
U se the included mains
respective adapter, connect the inspection light to a suitable power supply
(socket or cigarette lighter charging socket).
T hen proceed as described under „Using the LED inspection light without a
power connection" (starting with step 2).
NOTE: The LED inspection light can only be charged whilst off!
Troubleshooting
Q
fault
No functions
Indicator LED
7
does not illuminate
Charging takes a very
long time
Maintenance and cleaning
Q
The product requires no maintenance. The LEDs cannot be replaced.
S witch off and disconnect the product from the power supply before you clean it.
N ever immerse the product in water or other liquids.
D o not use corrosive cleaning agents.
C lean the product regularly with a dry, fluff-free cloth. Use a slightly moist cloth
to remove any stubborn dirt.
Disposal
Q
The packaging is made entirely of recyclable materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of
your worn-out product.
To help protect the environment, please dispose of the product properly
when it has reached the end of its useful life and not in the household
waste. Information on collection points and their opening hours can be
obtained from your local authority.
Defective or exhausted rechargeable batteries must be recycled in accordance
with Directive 2006 / 66 / EC and its amendments. Return the battery and / or the
device through the appropriate collection facilities.
to switch the torch
2
.
9
or car adapter
4
Possible causes and cures
- Mains adapter
inserted.
When connected to a cigarette lighter socket:
- Is the cigarette lighter socket supplied with power?
Some cigarette lighter sockets only supply power with
the ignition switched on.
- Check the fuse in the vehicle.
When connected to a cigarette lighter socket:
- Vehicle battery too weak?
as described in the section "Charging
6
on or off.
1
for this purpose. Using the
5
or car adapter
4
is not fully
5
GB/IE 13