Other Functions - Velleman VRC801D Manual De Instrucciones

d. Deleting All Learned Commands in the Remote Control
Use this function if you would like to delete all learned
commands in the VRC801D.
• Hold the SET key pressed for 3 seconds.
• Select LEARNING using the
or the
OK.
• Select DELETE ALL using the
press OK.
• SURE DELET appears on the LCD. Press OK to confirm.
All the learned commands have been deleted.

5. Other Functions

a. Setting Up the Clock
• Hold the SET key pressed for 3 seconds.
• Select CONFIGURE using the
press OK.
• Select TIME SETUP using the
press OK.
• Use the or the button to select the hour, minute and
AM/PM. Set the time using the numeral keys, set AM/PM
using the or the button. Press OK.
• Press EXIT to quit.
b. Locking the Volume
Enable this function when you only use one device to adjust
the volume.
• Hold the SET key pressed for 3 seconds.
• Select CONFIGURE using the
press OK.
• Select VOL LOCK using the
or the
OK.
• Select the device key corresponding to the device
• Select ON or OFF using the or the button. Press OK
to confirm.
• Press EXIT to quit.
c. Locking the Device
Enable the device-lock function to lock the code of your device. This code will not be modified during an automatic code
search.
• Hold the SET key pressed for 3 seconds.
• Select CONFIGURE using the
press OK.
• Select DEV LOCK using the
or the
OK.
• Select the device using the corresponding device key.
• Modify the status using the or the button. Press OK to
confirm.
• Repeat the 2 steps above to lock other devices if desired.
• Press EXIT to quit.
VRC801D
button and press
or the button and
or the button and
or the button and
or the button and
button and press
or the button and
button and press
- 4 - VELLEMAN