Description Of Symbols - Silverline 264153 Instrucciones Originales

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Wear protective clothing
Toxic fumes or gases!
Caution!
Always disconnect from the power supply when adjusting,
changing accessories, cleaning, carrying out maintenance and
when not in use!
Be aware of kickback!
Important safety devices! Ensure correct function, maintain in
accordance with instructions and DO NOT disable!
Keep bystanders away!
DO NOT use for side grinding.
Beware of flying objects
Double insulated for additional protection
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
4
Original Instructions
Technical Abbreviations Key
V Volts
~
Alternating current
A Ampere
n
No load speed
o
Hz Hertz
W, kW
Watt, kilowatt
/min or min (revolutions or reciprocation) per minute
-1
Specification
Voltage: ................................................................... 230V~, 50Hz
Power: .................................................................................500W
Rated speed: ........................................................... n:11,000rpm
Motor: .........................................................................Fan-cooled
Disc diameter: ............................................................... Ø115mm
Disc bore size: ............................................................ Ø22.23mm
Spindle thread: ......................................................................M14
Cable length: ........................................................................1.8m
Ingress protection ................................................................ IP20
Protection Class: ...................................................................
Dimensions (L x W x H .................................250 x 125 x 100mm
Weight.............................................................................. 1.48kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L :................ ......................................90.5dB(A)
PA
Sound power L :.... .................................................. 101.5dB(A)
WA
Uncertainty K:... ......................................................................3dB
Weighted vibration a :........ ............................................3.56m/s
h
Uncertainty K: ...................................................................1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will have a greater effect. Use
the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal
use for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
2
2