Extension Cord - Fein MULTIMASTER FMM250 Manual De Instrucciones

3 41 01 091 21 0.book Seite 7 Dienstag, 24. Juli 2007 3:32 15
M M FMM 250 / M
ULTI ASTER
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Sound emission
Measured A-weighted sound power level
L (re 1 pW), in decibels: 85
wA
Measuring uncertainty K
A-weighted emission pressure power level
measured at the workplace L
in decibels: 74
Measuring uncertainty K
REMARK: The sum of the measured emis-
sion value and respective measuring inaccu-
racy represents the upper limit of the
values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance
with the corresponding product standard.

Extension cord

If the use of an extension
WARNING
cable is required, its length
and conductor cross-section must be ade-
quate for the applicational case, in order to
prevent a voltage drop in the extension cable,
power loss and overheating of the power
tool. Otherwise, the extension cable and
power tool are liable to electrical danger,
and the working efficiency is impaired.
M FMM 250 Q
ULTI ASTER
Vibrations
Classification of FEIN
application tools according
, in decibels: 3
wA
to vibration class
VC0
(re 20 µPa),
pA
VC1
, in decibels: 3
pA
VC2
VC3
VC4
VC5
*These values are based on a work cycle
consisting of no-load and full-load opera-
tion of the same duration.
Recommended dimensions of extension
cords at an operating voltage of 120 V – sin-
gle-phase a. c., with only one power tool
FMM 250/FMM 250 Q connected:
Cord Size in A.W.G.
18
Cord Length in Feet
25
acceleration*
Wire Sizes in mm
16 14 0.75 1.5
Cord Length in Meters
100 150 30 60
EN
Weighted
2
< 2.5 m/s
2
< 5 m/s
2
< 7 m/s
2
< 10 m/s
2
< 15 m/s
2
> 15 m/s
2
2.5
120
7