Using Tanita Wireless Remote Display (D-1000Plus And D-1100Plus) - Tanita InnerScan BC-1000plus Manual De Instrucciones

Using TANITA Wireless Remote Display (D-1000plus and D-1100plus)

1. Initial Setting (Clock Setting)
Insert batteries into the remote display and then press
any front panel button to set the clock.
1) Set Hour
Press s/t buttons to set hour and then press SET.
The unit will beep once to confirm.
2) Set Minute
Press s/t buttons to set minute and then press SET.
The unit will beep twice to confirm the programming.
Resetting time
•
Press the clock button on the bottom of the remote
display.
Then follow the clock setting procedure 1) and 2).
2. Pairing the remote display and the BC-1000plus ("platform")
The platform needs to pair with the applicable remote display before measurements are attempted.
Pairing compatible remote displays: D-1000plus and D-1100plus
1) Before proceeding,
a) Install the batteries in the platform.
b) Install the batteries and set the clock in the remote display.
c) The platform and the remote display are within 17 feet (5 m) of each other.
2) Press and hold OFF button for 2 seconds on the remote display. The remote display will show "1234" for selecting
a personal number. Select the preferred personal
number which will be paired with the platform using
s/t buttons and press the SET button to confirm.
3) The remote display will show "SEt-P". Select "YES" or
"no" using s/t buttons, and press the SET button
to confirm,
a) "YES": The pairing process will continue to the next step.
b) "no": The pairing process will be cancelled and then the
clock will be displayed.
4) Input the 5 digit serial number found on the bottom
of the platform using s/t buttons and press the
SET button to confirm.
Cancellation-1: Press the OFF button to cancel during
the pairing process and then the clock
will be displayed.
Cancellation-2: The pairing process will be cancelled if inactive for 1 minute and then the clock will be displayed.
Note : • " 00000 ", " 00001 " and more than " 65535 ".
These serial numbers are not allowed. Please input the correct serial number.
• The serial number is located on the bottom of the platform.
4
Continued on the next page.
t
Battery Cover
Backlight Button
Upright Position