Paring The Bc-1000Plus ("Platform") With Software And Measurement - Tanita InnerScan BC-1000plus Manual De Instrucciones

Paring the BC-1000plus ("Platform") with Software and Measurement

The platform needs to pair with the compatible software before measurements are attempted.
Compatible Software: Healthy Edge
1) Before proceeding,
• Install the batteries in the platform.
• Install the software on your PC (The ANT Driver is installed on your PC automatically).
• Plug the ANT+ stick to USB port of your PC.
• Place the platform within 17feet (5m) of your PC.
2) Open the software and select your user profile (which is entered before pairing).
3) Click "File" from top left menu, and click "Healthy Edge Options...".
4) Select "BC-1000plus" and click "Connect". Enter the 5 digit serial number found on the bottom of the platform,
and then click "OK". The software memorizes the latest inputted serial number of the platform even if you close
the software or PC.
5) The platform will beep once and the Green Indicator Light on the platform will blink.
6) Step onto the platform while the Green Indicator Light is blinking.
The platform will beep twice and the Green indicator light will turn solid green after pairing is complete. Your
platform is now paired with your PC.
7) To get the measurement, click "New Measurement" to use the platform directly from the Software.
fig.1
BC-1000plus Readings on Healthy Edge
Weight
Body Fat %
Body Water %
Muscle Mass
Physique Rating
BMR
DCI
Metabolic Age
Bone Mass
Visceral Fat Rating
Warning
Do not use the body fat reading feature of this product if you have a pacemaker or other electronic implanted medical device.
The body fat monitor function is not intended for pregnant women, professional athlete or bodybuilders.
Software
TM
Adult (18 - 99 years old)
Standard
4
4
4
4
4
4
4
4
4
4
Software
TM
Athlete
4
4
4
4
4
4
4
4
4
4
Child
(7 - 17 years old)
4
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
3