Idrac Connection; Logging In And Initializing The Dr Series System - Dell DR Serie Manual De Instrucciones

Item Indicator, Button, or Connector Icon
5 PCIe expansion card slots (3)
6 Hard drives (2)
NOTA: The DR4100 system supports up to six 1–GbE ports or up to two 10–GbE ports. For the 1–GbE ports,
these are four internal LAN on Motherboard (LOM) ports referenced in item 4 above that reside on the
network daughter card (NDC), and two additional ports on a PCI Express expansion card referenced in item 5
above. If the DR4100 system is using the two 10–GbE ports, these ports reside on the NDC.

iDRAC Connection

The iDRAC connection requires a network connection between the integrated Dell Remote Access Control (iDRAC)
management port on the DR Series system and another computer running the iDRAC remote console session in a
supported browser. The iDRAC provides remote console redirection, power control, and the out-of-band (OOB) system
management functions for the DR Series system. iDRAC connections are configured using console redirection and the
iDRAC6/7 web interface. The login values you can use for making iDRAC connections are:
• Default username: root
• Default password: calvin
• Default static IP address: 192.168.0.120
For information on how to configure the iDRAC, see the Dell RACADM Reference Guides at support.dell.com/manuals
and Accessing iDRAC6/iDRAC7 Using
When the Dell DR Series System splash screen is displayed, you are ready to begin initialization using the DR Series
system CLI login process. For more information, see

Logging in and Initializing the DR Series System

Use the DR Series system CLI and the Initial System Configuration Wizard to log in to and initialize the system. After
completing a local console or iDRAC connection, log in to the DR Series system CLI:
1. Launch a terminal emulator application (like PuTTY), and type the default IP address for the DR Series system (if
you are not using iDRAC or local console).
2. At the login as: prompt, type administrator, and press <Enter>.
3. At the administrator@<system_name> password: prompt, type the default administrator password (St0r@ge!), and
press <Enter>.
The Initial System Configuration Wizard window is displayed.
42
RACADM.
Logging in and Initializing the DR Series
Description
– Two 10/100/1000 Mbps NIC connectors
– Two 100 Mbps/1 Gbps/10 Gbps SFP+/10-
GbE T connectors
Connect up to three full-height PCI Express
expansion cards
Provides two hot-swappable 2.5-inch hard drives
System.