About The Schedules Page And Options; Establecimiento De Un Programa De Replicación - Dell DR Serie Manual De Instrucciones

– Passthrough
– Dedupe (deduplication)
NOTA: If an OST or RDS client has four or more CPU cores, it is considered to be dedupe-capable.
However, the OST or RDS client operating mode depends upon how it is configured in the DR Series
system (Dedupe is the default RDA client mode). If the administrator did not configure an OST or RDS client
to operate in a specific mode and it is dedupe-capable, it will run in the Dedupe mode. If an OST or RDS
client is not dedupe-capable (meaning the OST or RDS client has less than four CPU cores), and the
administrator sets it to run in the Dedupe mode, it will only run in the Passthrough mode. If an OST or RDS
client is set to run in Auto mode, the OST or RDS client will run in the mode setting determined by the
media server. The following table shows the relationship between the configured OST or RDS client mode
types and the supported client mode based on client architecture type and corresponding number of CPU
cores.
Tabla 3. Supported OST or RDS Client Modes and Settings
OST or RDS Client
Mode Settings
Auto
Dedupe
Passthrough
NOTA: Click Select to identify the OST or RDS client on which you want to perform an action. For example, click
Select → Download Plug-In to display the Download Plug-Ins page for the client you selected. Select the plug-in
for the relevant client and protocol.

About the Schedules Page and Options

To display the Schedules page, click Dashboard → Schedules . This page displays any existing Replication or Cleaner
operations that have been set up for the DR Series system. If no times are listed, this indicates there are no scheduled
Replication or Cleaner operations. The Replication and Cleaner operations will automatically run whenever the DR
Series system detects a window of inactivity when there are no other major system operations running.
NOTA: Replication schedules can only be set on individual replication-enabled source containers.
The Schedules page lets you create a new schedule for running Replication or Cleaner operations, or you can modify an
existing schedule for either of these operations. For more information about scheduling Replication or Cleaner
operations, see Creating a Cleaner Schedule
NOTA: Cleaner operations are system processes that reclaim disk space from containers where files were deleted.
When no Cleaner schedule is set, the Cleaner process will run as needed.
The Schedules page displays the following:
• System Time Zone: using the following format (US/Pacific, Tue May 1 10:33:45 2012)
• Scheduled Replication operations: with day of the week (Sunday through Saturday), start time, and stop time
• Scheduled Cleaner operations: with day of the week (Sunday through Saturday), start time, and stop time
NOTA: Schedules only control the source container in scheduled Replication operations; the target container is
passive in these operations.
Establecimiento de un programa de replicación
Para establecer un programa de Replication (Replicación) desde la página Schedules (Programas), realice las
siguientes acciones:
66
32–Bit OST or RDS 64–Bit OST or RDS
Client (4 or more Client (4 or more
CPU cores) CPU cores)
Passthrough Dedupe
Not Supported Supported
Supported Supported
and Creating a Replication
32–Bit OST or RDS
Client (Less than 4
CPU cores)
Passthrough
Not Supported
Supported
Schedule.
64–Bit OST or RDS
Client (Less than 4
CPU cores)
Passthrough
Not Supported
Supported