Ce Declaration Of Conformity - FAAC 390 Manual De Instrucciones

Page 4 390 / 390 24
Guide for the installer
IMPORTANT NOTES FOR INSTALLER
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
2. ELECTRICAL EQUIPMENT (standards system)
3. INSTALLATION OF AUTOMATION
3.1. PRELIMINARY CHECKS
3.2. INSTALLATION DIMENSIONS
3.3. INSTALLATION STEPS
3.4. TEST OF THE AUTOMATION
4. MANUAL OPERATING MODE
5. RESTORING NORMAL OPERATING MODE
6. MAINTENANCE
7. REPAIRS
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 - Zola Predosa - Bologna - ITALY
Declares that: Operator mod. 390 / 390 24
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive
2006/42/EEC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will
become a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent
modifications.
Bologna, December 30, 2009
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol

CE DECLARATION OF CONFORMITY

390 / 390 24 with 230 V~ power supply
Notes on reading the instruction
draws your attention to the notes on the characteristics and operation of the product.
INDEX
Managing Director
A. Marcellan
page.5
page.5
page.5
page.5
page.5
page.5
page.6
page.6
page.6
page.6
page.6
page.6