Tabla de contenido
Publicidad
4.
Install wall plate assembly
using two lag bolts
. Tighten the lag bolts only until they are pulled firmly against the wall
15
14
plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall
plate until level. Tighten the bottom lag bolt when adjustments are complete.
4
14
14
15
15
11
Publicidad
Tabla de contenido
