Tabla de contenido
Publicidad
STEP 2B Attach Wall Plate - Solid Concrete / Concrete Block
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate assembly
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1.
Position the wall plate template
locations.
2.
Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
NOTE: TV shifts 4.3 in.
(10.8 cm) to the right or
left when in the home
position. Consider this
when selecting the loca-
tion of your wall mount.
12
directly onto the concrete surface
14
on the wall at your desired height. Level the wall plate template and mark the hole
13
13
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
2
13
75 mm
(3 in.)
10 mm
(3/8 in.)
Publicidad
Tabla de contenido
