1-3 Select TV Screw
Diameter
Hand thread screws into the
threaded inserts on the back
of your TV to determine which
screw diameter
(M4, M5, or
M6) to use.
M4
M5
M6
8
1-4 Select TV Screw Length
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
● Round/irregular back TVs
● TVs with inset mounting holes
● Extra space needed for cables
FLAT BACK
ROUND BACK
INSET HOLES
CABLES
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-888-333-9952.
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
-
Too short will not hold the TV.
-
Too long will damage the TV.
Too Short
Correct
Too Long