Instructions For Assembly; List Of Spare Parts - Kettler RX7 Manual Del Usuario

Ocultar thumbs Ver también para RX7:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
■ The exercise cycle has a magnetic brake system.
■ The equipment is independent of revolutions per minute.
■ Please ensure that liquids or perspiration never enter the machine
or the electronics.
■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
■ Always wear suitable shoes when using.

Instructions for Assembly

■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
■ Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.
■ Ensure that your working area is free of possible sources of danger,
for example don't leave any tools lying around. Always dispose
packaging material in such a way that it may not cause any
List of spare parts page 32-34
When ordering spare parts, always state the full article number, spare-
partnumber, the quantity required and the S/N of the product (see
handling).
Example order: Art.no. 07686-500 / spare-part no. 10100030 /
2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be used
for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal)
packaging, which is safe for transportation, in the original box if pos-
sible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material".
■ Use for your regular cleaning, maintenance and care our
appliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from the Sport
specialized trade.
■ Nobody may be in the moving range of a training person during
training.
danger. There is always a risk of suffocation if children play with
plastic bags!
■ The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resi-
stance is felt, then use spanner to finally tighten nuts completely
against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts
have been unscrewed they no longer function correctly (the
locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its useful
life please dispose of this article correctly and safely (local
refuse sites).
KETTLER (GB) Ltd.
GB
Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road · Virginia Beach · Virginia VA
23453 USA
http://www.kettlerusa.com
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

07686-500

Tabla de contenido