Pause Function; Recall Function - Asko HIHM934M Instrucciones De Empleo Y De Montaje

Operation

4.14 PAUSE function

The cooking process can be briefl y interrupted with the
PAUSE function, e.g. if the doorbell rings. The PAUSE
function must be released in order to continue cooking at
the same power level. If a timer has been set it will pause
and will then continue.
This function is only available for 10 minutes for reasons
of safety. The hob will then be switched off .
1. Pots and pans are on the cooking zones and the
required power levels have been set.
2. Press the PAUSE key
power settings, the interval sign
3. The interruption is ended by fi rstly pressing the
PAUSE key
left of the PAUSE key.
When operating the sensor fi eld slide over the
complete sensor fi eld.
The second key must be pressed within 10 seconds,
otherwise the Pause function will be maintained.

4.15 Recall function

(recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
The recall function only works if at least one cooking
zone is switched on.
1. The hob is inadvertently turned off by the ON/OFF key
of the hob
2. Within 6 seconds after turning it off , press the ON/
OFF key of the hob
LED will blink. The PAUSE key
immediately afterwards.
The original cooking levels are restored. The cooking
process continues.
What can be restored:
• Cooking levels of all cooking zones
• Minutes and seconds of programmed timer functions
• Automatic boost function
• Power boost
Not to be restored:
• Operation time limit (it is counted from 0)
. Instead of the selected
will light up.
and then the fl ashing sensor fi eld
.
again. The PAUSE key
must be pressed
GB
11