Festo SLG Serie Instrucciones De Utilizacion página 26

SLG−...
6 Commissioning
Complete system
Slowly pressurize the complete system.
S
Movements of the actuators will then be
under control, even in unintentional situ
ations.
Use the start−up valve type HEL−... for this
purpose.
Individual unit
Please note
As a result of possible faults in the struc
ture or in the controller, the component will
not react as expected under certain circum
stances.
S Make sure that:
nobody can reach into the positioning
range of the moving mass (e.g. by
means of a protective screen)
foreign objects do not enter the
positioning range of the moving
mass.
Warning
Uncushioned movements in the end posi
tions impede the functional reliability of
the component.
S Make sure that the fixed stops do not
project above the housing contour of the
component.
Otherwise the stops will not have suffi
cient cushioning effect. The inner slide
will strike against the cover.
26
Fig. 20
Fig. 21
0
Fig. 22
Festo SLG−... 0802d English
> 0