Using The Led Torch; Troubleshooting - Silvercrest HG02987 Instrucciones De Utilización Y De Seguridad

To end the charging process, separate the USB charg-
ing cable from the mobile device and the power bank
. The charging function can also be terminated
5
through pressing the key longer than 10 seconds.
The LED indicator for battery charging status
switch off after approx. 30 seconds.

Using the LED torch

To turn on the light, press and hold ON / OFF button
for approx. 2 seconds.
Press and hold ON / OFF button
2 seconds to turn the light off.

Troubleshooting

= Problem
= Cause
= Solution
The power bank
It may be that the power bank is not connected
properly.
Check that it is connected.
A connected device is not being charged.
The battery is drained.
Charge the battery.
3
is not being charged.
5
will
4
again for approx.
GB/IE
3
33