ABB EOH Serie Manual De Instrucciones página 17

Installation
Neutral assembly (optional)
Neutral assembly EOHXSN13 (optional)
Install the neutral link on the bottom plate of the safety switch
to the existing threaded holes according to the picture. See
chapter Cabling.
Wire range: #14 - 2/0, 2.5 - 70 mm
Safety
Torque: wire tightening
switch
Copper
size
[A] [lbs.in] [Nm]
30 35 3.9
60 45 5.1
100 50 5.6
2
Aluminium
[lbs-in] [Nm]
40 4.5
45 5.1
50 5.6
Instruction Bulletin EOH361K, EOH362K, EOH363K, 1SCC340029M1401 / A | Installation 1/13
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
See general safety instructions on page 1/2 before proceeding.
Failure to follow these instructions will result in death or serious injury.
1