Technical Specifications - Festo DGC Serie Instrucciones De Utilizacion

DGC−...
14

Technical specifications

DGC−...
Medium
Design
Pressure range [bar]
Permitted temp. range
(storage/operation)
Mounting position
Stroke force (theor.)
at 6 bar
Air consumption (theor.)
per 10 mm stroke
Leakage
Speeds (min ... max)
[m/s]
End position cushioning
End position cushioning:
Cushioning length
End position cushioning:
max. energy
Note about materials
48
8 12
Compressed air, dried, filtered, lubricated or non−lubricated (later
conversion from lubricated to non−lubricated compressed air only after
completely new lubrication)
Double−acting pneumatic cylinder without piston rod with rigid
piston−slide connection
2.5 ... 8
− 10 ... + 60 °C
30 N 68 N
0.0035 Nl 0.0079 Nl
When new: max. 5 Nl/h (typical: 1 Nl/h)
0.15 ... 1 0.1 ... 1.2
Elastomer cushioning /
shock absorber
See diagrams in the chapter Commissioning" (Fig. 24 and Fig. 25)
Only DGC−...−KF (free of copper, PTFE and silicon)
18 25
2 ... 8
(DGC−8−G: + 5 ... + 60 °C)
As desired
153 N 295 N
0.018 Nl 0.034 Nl
0.05 ... 3 0.05 ... 3
End position cushioning and elastomer
cushioning / shock absorber
16.5 mm 15.5 mm
32 40
1.5 ... 8
483 N 754 N
0.056 Nl 0.088 Nl
0.04 ... 3 0.04 ... 3
17.5 mm 29.5 mm
Festo DGC−... 0604b English