Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INS_810-3041-W
11/12/08
10:40 AM
Page 7
Step 4
Install leg braces (item #7) with support flange
towards center of grill onto the legs using
eight M6 x 12mm Phillips head bolts. Do not
tighten bolts until Step 6 is completed.
NOTE: Leg brace with two holes for grease cup
holder must be mounted on right side of
grill legs.
Step 5
Install firebox support bracket (item #8) onto
the holes on the left legs using two
M6 x 12mm Phillips head bolts. Do not tighten
bolts until Step 6 is completed.
Step 6
Install grill base (item #9) with firebox opening
towards left side on top of the legs using four
M6 x 12mm Phillips head bolts. Install two M6
x 12mm Phillips head bolts and M6 nuts thru
grill base (item #9) and leg braces (item #7).
NOTE: Now tighten all screws in Steps 1 thru
Step 6.
6
Publicidad
Tabla de contenido
