Safety Instructions - Triton TW SS10 Instrucciones De Funcionamiento Y Seguridad

SAFETY INSTRUCTIONS

WARNING! When using electric power tools, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and
personal injury including the following safety information. Read all
these instructions before attempting to operate this product and save
these instructions for future use.
WARNING: This appliance is not intended for use by persons
(including children) with reduced, physical or mental capabilities
or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children must be supervised to ensure
that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous
situation.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1 - Keep work area clear - Cluttered areas and benches invite injuries
2 - Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3 - Guard against electric shock - Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radiators, ranges, refrigerators)
4 - Keep other persons away - Do not let persons, especially children,
not involved in the work touch the tool or the extension cord and
keep them away from the work area
5 - Store idle tools - When not in use, tools should be stored in a dry
locked-up place, out of reach of children
6 - Do not force the tool - It will perform the job better and safer at the
rate for which it was intended
7 - Use the right tool - Do not force small tools to do the job of a heavy
duty tool
Do not use tools for purposes not intended; for example do not use
circular saws to cut tree limbs or logs
8 - Dress appropriately
- Do not wear loose clothing or jewellery, which can be caught in
moving parts
- Suitable safety footwear is recommended when working outdoors.
- Wear protective covering to contain long hair
9 - Use protective equipment
- Use safety glasses
- Use face or dust mask if working operations create dust
WARNING: Not using protective equipment or appropriate clothing can
cause personal injury or increase the severity of an injury.
10 - Connect dust extraction equipment - If the tool is provided for the
GB connection of dust extraction and collecting equipment, ensure
these are connected and properly used
11 - Do not abuse the power cable - Never yank the power cable to
disconnect it from the socket. Keep the power cable away from
heat, oil and sharp edges. Damaged or entangled power cables
increase the risk of electric shock
12 - Secure work - Where possible use clamps or a vice to hold the
work. It is safer than using your hand
13 - Do not overreach - Keep proper footing and balance at all times
14 - Maintain tools with care
Safety Instructions
4
- Keep cutting tools sharp and clean makes the tool easier to control
and less likely to bind or lock in the workpiece
- Follow instruction for lubricating and changing accessories
- Inspect tool power cables periodically and if damaged have them
repaired by an authorized service facility
- Inspect extension cables periodically and replace if damaged
- Keep handles dry, clean and free from oil and grease
WARNING: Many accidents are caused by poorly maintained power
tools.
15 - Disconnect tools - When not in use, before servicing and when
changing accessories such as blades, bits and cutters, disconnect
tools from the power supply
WARNING: The use of accessories or attachments not recommended by
the manufacturer may result in a risk of injury to persons.
16 - Remove adjusting keys and wrenches - Form the habit of checking
to see that keys and adjusting wrenches are removed from the tool
before switching it on
17 - Avoid unintentional starting - Ensure switch is in "off' position
when connecting to a mains socket or inserting a battery pack, or
when picking up or carrying the tool
WARNING: Unintended starting of a tool can cause major injuries.
18 - Use outdoor extension leads - When the tool is used outdoors, use
only extension cords intended for outdoor use and so marked. Use
of an extension cable suitable for outdoor use reduces the risk of
electric shock
19 - Stay alert
- Watch what you are doing, use common sense and do not operate
the tool when you are tired
- Do not use a power tool while you are under the influence of drugs,
alcohol or medication
WARNING: A moment of inattention while operating power tools may
result in serious personal injury.
20 - Check damaged parts
- Before further use of tool, it should be carefully checked to
determine that it will operate properly and perform its intended
function
- Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may
affect its operation
- A guard or other part that is damaged should be properly repaired or
replaced by an authorized service centre unless otherwise indicated
in this instruction manual
- Have defective switches replaced by an authorized service centre
WARNING: Do not use the tool if the on/off switch does not turn it on
and off. The switch must be repaired before the tool is used.
21 - Have your tool repaired by a qualified person - This electric
tool complies with the relevant safety rules. Repairs should only
be carried out by qualified persons, otherwise this may result in
considerable danger to the user
WARNING: When servicing use only identical replacement parts.
WARNING: If the power cable is damaged it must be replaced by the
manufacturer or an authorised service centre.
22 - Power tool mains plugs must match the mains socket - Never
modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and matching
sockets will reduce risk of electric shock
23 - If operating a power tool outside use a residual current device
(RCD) - Use of an RCD reduces the risk of electric shock