RadioShack Kameleon 4-in-1 Manual De Instrucciones página 7

or
or
NOTE: Press above
the title to activate
a desired program.
L
Use VOL (or VOL
volume for the selected device (also see Changing
Volume Lock on page 16).
In the TV, VCR, or DVD mode, use TV/VCR to switch
the TV's input to view TV or video programs.
In the CBL/SAT mode, use A/B to act as your Cable
Box's or Satellite Receiver's A/B switch.
Press MUTE once to turn the sound off or on.
In all modes except DVD, use CH
select the next higher (or lower) channel.
In the DVD mode, use SKIP
the next (or previous) chapter.
Use the number keys (1 ~ 9 and 0) to select
channels (e.g., 009 or 031) or enter numbers.
In the TV mode,use +100 to enter numbers above
100.In the DVD mode,use +100 to enter numbers
above 10.
For certain brands, press ENTER once after entering
numbers (if required on the original remote control).
In the program mode, use the program keys to
personalize the remote as follows:
Use DEV. SET. to program your device codes.See
Programming A Device on page 10.
Use SEARCH as an alternate way to set up a device
by searching available codes. See Searching For Your
Code on page 13.
Use MODE to reassign an unused device key to
control a second device. See Reassigning Device Keys
on page 22.
Use VOL. LOCK to set volume controls for individual
or global device use. See Changing Volume Lock on
page 16.
Use OTHER to program other functions. See the
Table Of Contents on page 2 for sections on Checking
The Codes, Using Keymover, Programming Favorite
Channel Scan, or Clearing All Custom Programming.
Use BRIGHT. to adjust the brightness level of the EL
display. See Adjusting Brightness on page 9.
O
WNER
M
) to raise (or lower) the
L
L
(or SKIP
continued on next page...
A Quick Look At The Controls 7
' M
S ANUAL
M
(or CH
) to
M
) to select