WEG CFW500 Guía De Instalación, Configuración Y Operación página 9

NOTE!
„
„
„
Any other combinations of the switches
are not allowed
NOTE!
„
„
„
Any other combinations of the switches
are not allowed
This module has a connector
use of the Flash Memory Module (CFW500-MMF), which
allows data transfer between inverters. For further details
on this accessory, refer to the installation, configuration
and operation guide of the CFW500-MMF.
RS485 Communication Plug-in Module
Configurations for activation of RS485:
S1.3 = ON and S1.4 = ON: RS485
termination ON
S1.3 = OFF and S1.4 = OFF: RS485
termination OFF
C o n f i g u r ati o n s fo r a c ti vati o n of
RS485(2):
S2.3 = ON and S2.4 = ON: RS485(2)
termination ON
S2.3 = OFF and S2.4 = OFF: RS485(2)
termination OFF
(figure A.2) to enable the
CFW500 | 9