Damage - Shipment/Installation; Tools You Will Need; Mounting Space; Parts Included - GE JV247 Manual De Instrucciones

DAMAGE – SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the
unit to the store in which it was bought for repair
or replacement.
• If the unit is damaged by the customer,
repair or replacement is the responsibility of the
customer.
• If the unit is damaged by the installer (if other
than the customer), repair or replacement must
be made by arrangement between customer and
installer.

MOUNTING SPACE

66 or more
from the
floor to the
top of the
hood
NOTES:
• Hood width may be greater than the width of the
range or cooktop, but it may not be smaller.
• Ensure the range or cooktop is installed per
manufacturer's installation instructions.
• If you are going to vent your range hood to the
outside, see the "Ducting Requirements" section
for exhaust duct preparation.
• The hoods are designed to fit 12" deep cabinets.
When installed onto 15" deep cabinets, a filler
panel accessory is available: Order JXS50SS for
30" wide hoods or JXS56SS for 36" wide hoods.
49-80589-7
Installation Instructions
Bottom edge of
cabinet needs
to be 30 or
more from
the cooking
surface
30
min.

TOOLS YOU WILL NEED

Flat-blade and Phillips
screwdrivers
Electric drill
Saw (saber or
keyhole)
Pliers
1/4
pivoting
hex socket
Flashlight Caulking

PARTS INCLUDED

PART
Grease Filter only (JV338)
Charcoal Filter only
(JN327, JN328 and RN328)
Grease Filter and
Charcoal Filter
(JV24X, JV347, JV348,
JV367 and AV447)
Mounting Screws
(8 - 18" x 3/4" Phillips pan
head)
Exhaust Adaptor
(for 3 1/4" x 10" rect.
venting)
Exhaust Adaptor Screw
(8 - 18" x 3/8" Phillips pan
head or hex head)
Pencil
Duct tape
Metal snips
(in some
applications)
Tape measure Wire stripper
Level
1/4 Nutdriver
QUANTITY
1
1
2
4
1
1
9