The Info Displays; Setting Up A New Model Model Type: Easy - Multiplex Cockpit SX M-LINK Ampliación

Supplement to the manual
12.2.

The INFO displays

The following table shows the seven INFO displays,
and the information they provide.
NEW:
If you are operating the C
lemetry-capable receiver, you can read off the voltage
of the receiver battery in the menu INFO 7. For ad-
ditional security the transmitter emits an audible alarm
if battery voltage falls below the (user-variable) alarm
threshold; for more details please see the receiver in-
structions.
You can "leaf through" the INFO displays by turning
the 3-D digi-adjuster.
INFO 1 Model type symbols
Model memory number
Model name
Transmitter battery voltage
INFO 2 Model type symbols
Model memory number
Transmitter battery voltage
resets Timer 1 *
INFO 3 Model type symbols
Model memory number
resets Timer 1 and 2 *
INFO 4 Model type symbols
Model memory number
resets Timer 2 *
INFO 5 Model type symbols
Model memory number
Transmitter operating time
INFO 6 Model type symbols
Model memory number
Owner's name (if entered)
Software version
INFO 7 Model type symbols
Model memory number
Receiver battery voltage
(telemetry-capable receivers only)
* You can reset the various timers with a long press
on the 3-D digi-adjuster in INFO displays 2 to 4.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de
SX M-LINK with a te-
OCKPIT
Timer 1
Timer 1
Timer 2
Timer 2
2. 1 2
13. Setting up a new model
Model type: EASY
13.7.4 Model type EASY: changing the
standard assignment of receiver output 5
(aileron). Menu: (MIXER) A-->S5:
If you have set up a new model using the EASY model
type, then receiver output 5 is assigned to the second
aileron servo. If this is what you want, you do not need
to make any changes in this menu.
However, many model aircraft feature no ailerons at all,
or only require a single aileron servo to operate both
ailerons. For such cases it is possible to assign
receiver output 5 to other functions if necessary.
You can control receiver output 5 using any of the
transmitter controls A, E, R, THR, SP, F or the switch
PH.
This change can be carried out in the menu point A--
> S5 in the MIXER menu (see also 13.7.3).
How to access the menu A-->S5:
Action
left to MENU
1.
confirm
right to MIXER
2.
confirm
right to
3.
A-->S5
confirm
By turning the 3-D rotary control (
transmitter control or switch to which you want to
assign receiver output 5 :
Receiver output 5:
= Aileron:
= Elevator:
= Rudder:
= Throttle:
= Spoiler:
= Flap:
= Flight phase switch:
Note: you can select three positions using the flight
phase switch PH.
A brief press ( ) confirms your selected assignment.
Turn to the left ( ) to EXIT, and return to the MIXER
menu with a brief press ( ).
Effect
SETUP appears
THR>S4 appears
A-->S5 flashes
) you select the
A-->S5
E-->S5
R-->S5
THR>S5
SP->S5
F-->S5
PH->S5
Seite 7/9