The Cockpit; Trainer Mode Operations; Accessories And Spare Parts; Multi-Function Socket Interfaces - Multiplex Cockpit SX M-LINK Ampliación

Supplement to the manual

20. Trainer mode operations

20.2. The C SX as Pupil transmitter
OCKPIT
If used as a Pupil transmitter, the C
can be connected to the following MULTIPLEX
Teacher transmitters:
C SX, C
OCKPIT OCKPIT
PROFI mc 4000, PROFI mc 3010 / 3030
ROYALevo / pro 7 / 9 / 12 / 16
(you will find a table on the Internet showing fur-
ther types)
If you wish to use the C
OCKPIT
transmitter, follow this procedure:
1. Switch both transmitters off.
2. Insert the plug marked Pupil into the multi-function
socket of the C SX M-LINK transmitter. Insert
OCKPIT
the plug marked Teacher into the multi-function
socket of the Teacher transmitter.
3. Switch on the Teacher transmitter only !
Power is fed to the C
OCKPIT
Trainer lead.
PUPIL flashes on the screen.
4. Use the 3-D digi-adjuster to select the pupil type
PUPILM for the following MULTIPLEX Teacher
transmitters:
e.g. PROFI mc 3010 / 3030 / 4000
Note: ROYALevo / pro as Teacher transmitter
If you use a ROYALevo / pro 7 / 9 / 12 / 16 as Teacher
transmitter, the selected
ROYALevo / pro must be the same as the Pupil type
on the C SX M-LINK:
OCKPIT
ROYALevo / pro C
TeacherM PUPILM
TeacherU PUPILU
( )
5. A brief button press
permanently. For safety's sake it is now no longer
possible to change the transmitter setting.
If you wish to terminate Pupil mode, you must switch
the Teacher transmitter off, and disconnect the
Trainer lead.

21. Accessories and spare parts

Item
2.4 GHz transmitter aerial
Aluminium stick-tops
6-cell NiMH transm. battery, 1800 mAh
Transmitter case
Transmitter tray
PROFI transmitter neckstrap
Padded cushion for PROFI neckstrap
"Cross-over" transmitter support strap
USB simulator interface lead
PC interface for data back-up / update
Trainer lead (straight connectors)
Trainer lead (right-angled connectors)
20.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de
SX M-LINK
OCKPIT
SX M-LINK
SX M-LINK as a Pupil
SX M-LINK via the
Teacher type on
SX M-LINK
OCKPIT
stores the setting
Order No.
# 89 3007
# 7 5304
# 15 6001
# 76 3323
# 8 5306
# 8 5646
# 8 5641
# 8 5640
# 8 5153
# 8 5148
# 8 5121
# 8 5118
For more information relating to accessories and re-
placement parts please consult the current main cata-
logue or our Internet website: www.multiplex-rc.de.

22. Multi-function socket interfaces

The multi-function socket of the C
provides the following functions:
• Charge / discharge the transmitter battery
• Trainer mode operations
• PC socket for flight simulator
• PC socket for data back-up / update
22.1. PC socket for flight simulator
The C
OCKPIT
without further modification as a control unit for many
flight simulators.
MULTIPLEX transmitters are available from flight simu-
lator manufacturers.
If you have queries, please consult the manufacturer of
your simulator program.
Free model
MULTIPLEX website
The USB interface lead for use with this simulator is
available from model shops under Order No. # 8 5153.
22.2. PC socket for data back-up / update
If used with the free PC program "COCKPIT SX Data-
Manager" and the PC interface lead, # 8 5148, the
the
C SX M-LINK offers the following facilities:
OCKPIT
•
UPDATE (Firmware)
When software corrections, modifications or ex-
pansions become available, you can download
them from the Internet and load them into your
transmitter.
•
Data back-up
You can store data for individual models on your
PC, and load them back into your transmitter if
and when required.
The PC program "COCKPIT SX DataManager"
available on our website as a free download. You will
find it under DOWNLOADS, SOFTWARE at our web-
site:
www.multiplex-rc.de
OCKPIT
SX M-LINK can be used directly and
Special interface
flight simulator (FMS)
SX M-LINK
8.
20. 20.2.
22.1.
22.2.
leads for
on the
is
Seite 9/9