Lenze E94AYCIB Instrucciones Para El Montaje página 51

)
Note!
Switch off the voltage supply of the communication module and then on again
in order to activate changed settings.
You can also carry out the settings by means of codes:
All DIP switches = "OFF" (Lenze setting):
ƒ
When you switch the power on, the configuration determined by the codes
C13892/C14892, C13893/C14893 and C13894/C14894 becomes active.
At least one DIP switch = "ON":
ƒ
When the power is switched on, the values determined by the switch
settings are adopted.
The total number of data words (PD + PCP) must not exceed 10.
EDK94AYCIB DE/EN/FR/ES/IT 2.0
Possible settings via DIP switch
l
Commissioning 7
51