Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IV. Basic operation
Charge your headset
•
Plug the supplied cable into the USB port of
your computer or to a 5V USB adapter to
charge the battery.
•
Connect the micro-USB end of the cable into
the charging port of the headset.
•
Make sure that your headset is fully charged
before using it for the first time.
•
The headset battery has to be initially charged
for at least 3 hours. Thereafter, the battery
will take around 2 hours to recharge.
•
While the headset is being charged, the LED
glows red. The status light turns off once it
has reached full capacity.
Turning your headset on and off
1.
Press and hold the power button for several
seconds to turn the earphones on. The blue
LED will blink, accompanied by an audible
tone.
2.
To power off the device, press and hold the
power button again for several seconds.
Another short tone will be heard, making the
LED indicator to turn off completely.
V. Advanced operation
Note: Before installing this product, please
make sure your device has the built-in
Bluetooth
feature available.
®
Pairing the earphones with your
mobile device
1.
Place both devices not more than one
meter away from each other.
2.
Set your Bluetooth
®
wireless headset.
Press and hold the MFB button
3.
seconds to turn the headset on and to put it
into the pairing mode.
An audible tone will be heard, accompanied
4.
by alternating blue and red LEDs, to indicate
that the headset has entered into the pairing
mode.
5.
On your mobile phone, tap the newly
discovered audio device (KHS-632)
displayed in the Bluetooth
6.
When the phone asks if you want to pair
with the earphones, click Yes or Ok to
accept.
If you have a lower Bluetooth
7.
may be prompted to enter the passkey
0000 (4 zeros).
phone to "discover" the
for several
list.
®
version, you
®
Publicidad
Tabla de contenido
