Hkoenig SWR22 Manual De Utilización página 11

Cleaning of sensor and infrared transparent window
1. Clean the sensor and infrared transparent window with the cotton swab or soft cloth.
2. The wall detection sensor is in front of the cleaner, while the ground detection sensor and infrared
transparent window are al the bottom of the cleaner.
3. Please keep the transparent window dean so as to make the robot work better.
Replacement of battery :
Battery replacement of the cleaner :
1. Release the screw with a screwdriver, open
ils base plate.
2. Connec! Iwo terminais
installation.
3. Place the positive and negative poles correctly
for fear of the damage due to wrong poles.
4. Set the cleaner in charging status to keep the
best performance of the battery while the
cleaner is not in use.
5. Ensure using the original battery of the
manufacturer for installation, otherwise there
may be damage or accident.
Battery replacement of the remote contrai :
1. Open the battery cover and then replace the battery.
2. Please place the batteries (not included) with correct
polarity.
3. Please take out the battery if il was unused for long.
during battery