Hkoenig SWR22 Manual De Utilización página 9

6. Reverse the dustbin, tear out the mop, release the trailing bar and then unplug the right and left fasteners
on the botlom of the dustbin. Ali parts should be assembled as before disassembly.
& :
Don'! use the mop and trailing bar on the carpe! or uneven ground.
Cleaning of dustbin and blower :
1. First dump the dust, and the,
and then clean it with dust brush.
2. Pop up the blower, and
then clean the air inlet/outlet
with dust brush.
3. Don't clean the blower
in water!
4. Pop up the blower, take out the
filter, and then clean the dustbin in
water.
5. Clean the filter by hairdryer of
dust brush.
6. After cleaning, you can
assemble it firmly as before the
disassembly.
Assembly & disassembly and cleaning of main brush, floor brush, side brush
Assembly & disassembly of mid cleaning brush and floor brush
1. Force the locking bar forward and raise the cover by right
thumb, and then raise rod of the mid cleaning brush by
your left hand.
2. Take out the main brush and floor brush.
3. lnsert the main brush and floor brush into the holes before
closing the cover in assembly.
"' - �