Tabla de contenido
Publicidad
Secondary Filter
Secondary Filter
Filtre secondaire
Filtro secundario
Cleaning Secondary Filter
Filtre secondaire
Filtro de secundario
Rib Projections
Rainures
Lengüetas
➢ Secondary filter protects the motor.
➢ It is recommended to clean filter
with cold water at least every three
(3) months. Check the secondary
filter frequently and clean when
dirty.
➢ Check filter when installing a new
dust bag.
➢ Turn off and unplug the vacuum
cleaner.
➢ If dirty, pull filter from bottom of
dust compartment and clean.
➢ Wash with cold water only, DO NOT
use detergent or soap.
➢ Once the filter is washed clean,
squeeze by hand and allow to
air-dry.
➢ Allow filter to dry for 24 hours
before placing back into vacuum
cleaner.
NOTE: When the cleaning of the filter
no longer restores vacuum cleaner
suction to full power, replace the filter.
DO NOT operate without secondary
filter installed.
DO NOT wash in the dishwasher.
DO NOT install the filter when damp.
➢ Ensure filter is fully inserted under
plastic rib projections.
- 40 -
Publicidad
Tabla de contenido
