Operating Parameters; Setting The Power Level; Setting The Temperature - Palazzetti ECOFIRE IDRO Manual De Instalación, Uso Y Mantenimiento

7.3 OPERATING PARAMETERS

Stove operation is determined by the Power level and Temperature parameters set by the user.

7.3.1 setting the power level

consumption.
To change the power level use the
a) Use the
b) Select submenu "1
d) Press

7.3.2 Setting the temperature

DESCRIPTION
Room temperature
Storage temperature
Water temperature
Frost protection
temperature
Restart delta
To change the values, use the
a) Use the
d) Press
storage tank.
temperature.
stove switches on (outside of preset time bands).
temperature at which the stove switches on again automatically. For example, if the stove is set to switch off at
20°C and "Restart delta" is set to 4°C, the stove will switch on again when the temperature measured is less
than or equal to 16°C.
INSTALLATION MANUAL
USE AND & MAINTENANCE
buttons to go to the power menu
buttons to scroll the submenu
CONFIGURATION
1 2 3
[1]
[1] [1]
[1] [2]
[3] [2] [2]
[4] [3] [3]
buttons to go to the temperature menu
buttons to scroll the submenu
: this is the number of degrees centigrade below the switch-off
- cod. 004771060 - 09/2011 - Palazzetti - PN - Italy
.
(buttons (1 minimum,....5 maximum)
4
.
buttons
: setting this value changes the desired hot water outlet
;
45/140