Setting The Volume - Palazzetti ECOFIRE IDRO Manual De Instalación, Uso Y Mantenimiento

8.3.2
The data shown on the display when this is in standby mode can be set.
Use the arrow buttons
a) Use the button to scroll the submenu
c) Set one of the following values using the
"OFF"
The display remains on the last operation set by the user;
"1"
All operating parameters are displayed cyclically;
"2"
"3"
The current time is shown
"4"
d) Press
8.3.3
Display brightness when in standby mode can be set.
Use the arrow buttons
a) Use the button to scroll the submenu
c) Set the desired brightness using the

8.3.4 Setting the volume

The volume of the buzzer can be set based on requirements:
Use the arrow buttons
1) Use the button to scroll the submenu
3) Set the desired volume using the
8.3.5
The type of pellets used can be set:
Use the arrow buttons
a) Use the
button to scroll the submenu
c) Set one of the following values using the
"1"
Small pellets
"2"
Medium-sized pellets (factory setting)
"3"
Large pellets
d) Press
INSTALLATION MANUAL
USE AND & MAINTENANCE
to go to the setup menu
and
to go to the setup menu
and
to go to the setup menu
and
to go to the setup menu
and
- cod. 004771060 - 09/2011 - Palazzetti - PN - Italy
;
.
buttons:
;
.
buttons and press
;
.
buttons and press
;
.
buttons:
, If the function
47/140