Instruction manual
PARTS DeSCRIPTION
1. Lid
2. Funnel
3. Watertank
4. Thermos
5. Hotplate
6. On/off switch
1
2
4
5
4
OPeRATION AND MAINTeNANCe
• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main voltage
of your home.
• Rated voltage : AC220-240V 50Hz.
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
BeFORe FIRST USe
• Take the removable filter out of the funnel (No. 2) rinse the filter and the
thermos (No. 4) with hot water. Half-fill the water tank (No. 3) with water
and place the filter and the thermos back on the device. Press Turn the
on/off switch (No. 6) to ON. The device is rinsed with hot water.
3
• Turn the machine off and empty the coffeepot. Attention! The water is hot.
• Your coffee machine is ready for use.
USe
• Fill the reservoir with the desired quantity of clean drinking water.
Place a paper coffee filter in the removable filter or just use the
removable filter only, depending on your needs.
• Fill the filter with the desired amount of ground coffee.
• Place the thermos (No. 4) underneath the filter and switch the device
6
to ON.
• Make sure the thermos is placed correctly on the hotplate.