CLOSING THE CHASSIS
Press the button (T11) and lift the rear handle (T12).
Firmly pull the rear handle (T12) upwards until the chassis is completely folded
REAR WHEELS BRAKE
To engage the brake, push down the lever (T13) positioned on the right rear wheel
assembly
Always engage the brake during stops.
CARRY HANDLE
To transport the folded chassis, use the handle (T14). Do not lift the chassis by the
opening handle (T12).
BLOCKING/UNBLOCKING THE FRONT WHEELS
means of the lever (T15
REMOVING THE FRONT WHEELS
If necessary, the front wheels can be easily removed. To do so, push the lever
(T16
To reattach the wheels, insert them in correspondence of the opening (T17) and
push until it clicks into place.
CAUTION: wheel can detach and cause tip over. Pull on the wheel to assure it is
securely attached.
REAR PLATFORM
FEEDING BOTTLE HOLDER
To fasten the feeding bottle holder, place the upper guide in correspondence of the hook
(T18) on the chassis and push it in its housing until it is fully attached.
STORAGE BASKET
the eyelets (B1) onto the rear hooks (T19) on the chassis.
B2) pass through the eyelets (T20) on the side of the frame and fasten the
corresponding press studs.
Finally, insert the eyelets (B3) onto the front hooks (T21) on the chassis
ADDITIONAL TRANSPORT UNITS (BASSINET AND PUSHCHAIR SEAT)
pushchair seat.
QUAD/TRILOGY BASSINET
THE BASSINET IS AN OPTIONAL COMPONENT AND IS SOLD SEPARATELY.
Take the bassinet from the handle and attach it to the chassis in correspondence
of the housings on both sides of the structure and place it solely in rear facing position.
DETACHING THE BASSINET FROM THE CHASSIS
Use the lever (C3) on the outside of the bassinet.
Simultaneously, lift the bassinet by holding it by the handle.
T10) with your foot to cross obstacles.
T3).
T4). To secure it, insert
23