Control Knobs; Oven Light Bulb - Kenmore 911.36655 El Manual Del Propietario

CARE ANDCLEANING
RemovableParts
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
• Soft cloth
Molded _"<_2_
r--_ Spring _ _
Clear Groove
in Stem
TO REMOVE
1. Be sure the control knob is in the
off position,
2, Pull straight off the stem
Using a piece of string can make
removing the knob easier, Slip the
string under and around the knob,
pulling straight out°
TO CLEAN
Wash the knob thoroughly with soapy
water. Dry completely with a soft
cloth_ DO NOT let the knob
soak.
TO REPLACE
1. Check the back of the knob,The
molded rib of the knob is designed
to fit perfectly onto the knob stem.
2, Align the molded rib to the clear
groove in the knob stem.
3. Push the knob back as far as it will
go.
tv
CAUTION: Be sure
the oven light
switch is in the off
position. Do not
touch a hot light bulb with
wet hands or a wet cloth.
Wait until the bulb has
cooled and use a dry cloth.
Never touch the live collar of
the bulb. |f you are replacing
a broken light bulb, make
sure the power supply is off.
_ , ,i,iii I , ,ll,ln
Glass Retaine__
oc e,_ i
Bulb _ ......--'%.j
Live Collar
Glass Cover
TO REPLACE
1. Remove the three screws and lift
off the glass retainer, glass cover
and gasket.
2. Replace the bulb with a 40 watt
appliance bulb. An appliance
bulb is smaller than a standard 40
watt household bulb.
3. Replace the gasket, glass cover
and glass retainero Tighten screws
securely,
2O