Before Calling Forservice - Kenmore 911.36655 El Manual Del Propietario

BEFORE CALLING FORSERVICE
To save you time and money, before making a service call check the list below for any
problem you may feel you have with the performance of your range, If the problem is
something you cannot fix use the Consumer Service Numbers located at the back of this
manua!, When making any calls have the Model No., Repair Parts list,
Use and Care Manual and the Date of Purchase available.
PROBLEM
The display of your
control is flashing
"F" followed by a
number or letter.
POSSIBLE CAUSE
Range malfunction.
POSSIBLE SOLUTION
Press the CLEAR/OFF
pad. Let the oven cool for
1 hour and enter an oven
or cleaning operation° If
code repeats, call for
service.
Oven and even
control will not
work.
No power to range.
i iluln I_'_1
Check the circuit breaker
or fuse. Make sure the
power cord is plugged in,,
,It t I i,i 1111111111111111,
Oven temperature Thermostat calibration.
seems inaccurate.
See the adjustments
described following this
section.
,,,,r,,.
Oven will not Clean cycle is not
unlock, finished.
Oven temperature must
drop below the lock
temperature before the
door will unlock.,
Oven light will not
work.
a. Light switch in off
position.
b. Oven light bulb
burned out,
a. Check oven light
switch on the control
panel°
b. Check the oven light
bulb.
Oven did not
clean or results
were poor,
a. Controls were not set
properly,,
b. Clean cycle was
interrupted_
c. Oven was soiled
heavily.
a. Check the self-cleaning
section of this manual,
b. The normal clean cycle
should last 3 hours.
c. Heavy spillovers
should be removed
before the cycle is set.
You can also repeat
the cycle.
24