Setting The Time/Date Automatically - Magnavox MRV640 Manual De Instrucciones

Setting the time/date automatically

This function uses the information sent via the local PBS channel to automatically set the
time/date. For this reason, you must enter the PBS channel that sends this information. When
the DVD Recorder chooses a wrong PBS channel or the displayed time/date is wrong, you must
manually set the date/time (see section 'Manually setting the time & date').
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2 ' using D or C .
Select ' A
3
Select 'Installation' (at the bottom of the second menu) using
B or A and confirm with C .
4
Select 'Time/Date' using B or A and confirm with C .
5
Select 'Automatic' with B or A and confirm with C .
6
Select 'PBS Channel' with B or A .
7
Use D or C to select the channel which sends the time/date
information and confirm with OK . The DVD Recorder will
check whether or not the information transfer is possible.
a 'Clock not set, check channel' will appear on the TV screen
b No time/date data can be received from this TV channel.
Select a different channel or 'Auto.' in line 'PBS Channel'.
8
D or
Use
A select one of the following settings in 'Daylight Saving',
then press OK .
'On': The time adjusts automatically for 'Daylight Saving' Time
in April and October.
'Off': The time does not adjust for 'Daylight Saving' Time.
9
Use B or A to select 'Time Zone'. Use D or C to select
your time zone if the PBS channel entered was for a different
time zone. This is the only way to set the time correctly, or, if
necessary, to correct it.
If you want to use the time zone of the PBS channel, select
'Auto.'.
10
Confirm the changes with OK .
11
To end, press SYSTEM-MENU repeatedly.
The time and date are automatically obtained from the selected PBS channel after the Recorder
is shut off.
Installing your DVD recorder
C to select 'Daylight Saving', with
Problem
B or
Time/Date
Automatic
PBS Channel Auto.
Daylight Saving Off
Time Zone Auto.
To exit press
SYSTEM MENU
29