5
Press PLAY/PAUSE G9 at the corresponding position.
6
Set the end marker with OK . This will also be the start marker
of the next chapter.
The number of chapters ('C') in the menu line increases by one.
a The number of chapters ('C') has increased by two or more
numbers
b This is the case when you want to hide a chapter that, due to
automatic chapter numbering (if switched on), stretches over two or
more chapters. In this case, you must delete the start of the
automatically generated chapter:
Press T/C twice while the editing menu is displayed to change the
1
chapter number.
Select the chapter between the new markers using B or A .
2
Press PLAY/PAUSE G9 .
Select 'Delete chapter marker' with B to delete the current
3
chapter marker. Confirm with OK . The current chapter number
decreases by one.
7
Press T/C twice to change the chapter number 'C'.
8
Select the previous chapter with B , since you are already in the
next chapter (end of the chapter is also the beginning of the next
chapter).
9
Wait
until
PLAY/PAUSE G9 to stop playback.
10
Select 'Current chapter' using B or A .
11
Using C select 'hidden'. The picture is shown darker.
Switching quickly
You can switch between show chapters ('Visible') and hide chapters
('hidden') quickly and easily using SELECT .
This function is independent from the selected line.
12
To end, press EDIT .
During playback this chapter will be skipped.
If the chapter is not visible, select 'Visible' in step
54
the
chapter
has
been
with C .
11
Problem
played
and
press
Tip
Managing disc content