Playback; General Information Regarding Playback; Inserting A Disc - Magnavox MRV640 Manual De Instrucciones

F

Playback

General information regarding playback

The DVD Recorder can be used with the following discs:
•) DVD
•) Video CD or Super Video CD
•) DVD+RW
•) DVD+R
•) DVD-RW (video mode, finalized)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3-CD
You can operate the Recorder using the remote control or the buttons on the front of the
Recorder.
a 'PIN' appears on the display.
b The child lock was activated for the inserted disc. Read 'Child lock'
and 'Authorizing discs' in the 'Child lock' chapter.
a I see an 'X' in the menu bar on the screen.
b DVDs can be manufactured in such a way that certain operations are
required or only specific functions are possible during playback. When
the 'X' symbol appears on the screen, the selected function is not
available.
a I see region code information on the screen.
b Because DVD films are usually not released at the same time in all
regions of the world, all DVD players are keyed to a specific region
code. Discs can be assigned an optional region code. If the region
codes of the player and disc do not coincide, playback is not possible.
b The region code for a DVD player can be found on a label at the
back of the device.
b There are no region codes for DVD+Rs.

Inserting a disc

1
OPEN/CLOSE J button on the front of the
Press the
Recorder. The disc tray will open. 'OPENING' will appear in the
display, then 'TRAY OPEN' will appear while the tray is open.
2
Carefully place the disc into the tray with the label facing up, then
PLAY/PAUSE G9 or
press
then 'READING' will appear on the display. This indicates that the
disc is being read.
How do I insert double sided DVDs?
Double-sided DVDs do not have labels on either side. The label for each
side is placed in the middle (on the inner ring). To play a specific side,
the label of the side you want to play must be on top or facing up.
34
OPEN/CLOSE J . 'CLOSING'
Problem
OPENING
?
P01
Playback