Programming A Recording Without The Vcr Plus; System - Magnavox MRV640 Manual De Instrucciones

Programming a recording without the
VCR Plus+ ®

system

1
Turn on your TV. Select the channel number for the DVD
Recorder (Audio/Video In or channel 3 or 4).
2
With the Recorder on, press TIMER on the remote control.
3 Select 'Timer Programming' using B or A and confirm with
C .
The information will be displayed.
4
Select a field with D or C .
5 Enter information with B , A or the number buttons 0..9 .
For 'Date', you first enter the month and then the day.
Selecting daily/weekly recordings
In 'Date' use SELECT to select from the following options:
'Mo-Fr': Repeated daily recordings from Monday to Friday
'Mo': Repeated weekly recordings (every week on the same day, e.g.
Monday).
Channel numbers of the 'EXT1' and 'EXT2' jacks
You can also program recordings from external sources connected to
S-VIDEO (Y/C) ,
VIDEO Y PB PR ('EXT1').
Change 'AM/PM'
Use the SELECT button to select 'AM' or 'PM' in the fields 'Start' and
'End'.
Changing the recording quality
Select the 'RecMode' field using C .
Use B or A to select the recording mode.
6
If all information is correct, press the
information is stored in a TIMER block.
7
To end, press TIMER .
The disc you have inserted will be checked.
8
Find the position on the disc where the recording should begin.
9
Switch off the Recorder with STANDBY m .
The programmed recording will only function properly when the
DVD Recorder
STANDBY m button.
If any of the TIMER blocks are in use, 'TIMER' will light up on the display.
64
VIDEO (CVBS) ('EXT2') or
OK button. The
has been switched off
COMPONENT
Tip
using the
Programming a recording (TIMER)
Timer
Timer Programming
Date Ch. Start End
01/22 01 08:30AM 10:30AM
Mo-Fr/Weekly
Press SELECT
Rec
Mode
M1
To store
Press OK